uts hi seal description dynamic ip68/ip69k - waterproof connec - tors in mated and unmated condition uts hi seal connector is a range of light- weight industrial plastic circular connec- tors compatible with mil-dtl-26482 connectors. it offers dynamic ip68/ip69k water protection in both mated & unma- ted conditions . available : ? in 5 shell sizes, ? up to 21 contact arrangements ? with multiple polarization options. connectors are standard supplied with preassembled handsolder contacts. for dispsolder or crimp contacts, please consult factory. applications uts hi seal connector is suitable for a broad range of applications, such as ? wet & submerged environments ? instrumentation ? meteorological measurement system ? traffc control ? videosurveillance ? tunnel fans ? water measurement and there is more. benefts protection of electronics inside the equipments/boxes in case of maintenance, unmated conditions or cable damage i ntermateable and interchangeable with existing solutions ? design based on mil-dtl-26482 connectors or equivalents such as : bs 9522 f0017, nfc93422, he301b, vg 95328. ideal for indoor / outdoor applications ? dynamic ip68/69k water protection (during vibration and cable mouvements) ? corrosion resistance operational safety - esd ? plastic shells rapid and secure locking system ? bayonet connector suitable for overmoulding ? sealed insulator and contacts respect for environment ? rohs compliant visual identifcation ? coloured rings
uts hi seal technical characteristics environmental ? operating temperature -40c to + 105c ? sealing (mated/unmated) dynamic ip68 - under water for 1 week, 1 bar dynamic ip69k per din 40050 ? salt spray 500 hours ? uv resistance no mechanical degradation or important variation of color after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per iso4892) ? rohs compliant & conform to the chinese standard sj/t1166- 2006 (chinese rohs equivalent) material ? housing + backshell thermoplastic ul94-v0 mechanical ? durability 250 matings & unmatings ? vibration resistance sinusoidal vibrations per cei 60512-4 - from 10 to 2000 hz ? thermal shock 5 cycles 30 min. from -40c to 105c per mil-std1344 method 1003 electrical ? current per contact max. size 16: 13a size 20: 7.5a ? insulation resistance 5000 m ? under 500vcc at 25c ? test potential 1500 veff between contacts size 20 2300 veff between contacts size 16 ? working voltage 600 v - contacts size 20 1000 v - contacts size 16 according to mil-dtl-26482 contacts arrangements size 8 2 contacts : 2 ? 1 (#20) 3 contacts : 3 ? 1 (#20) 3a/98 contacts : 3 ? 1 (#20) 4 contacts : 4 ? 1 (#20) 33 contacts : 3 ? 1 (#20) size 10 6 contacts : 6 ? 1 (#20) 7 contacts : 7 ? 1 (#20) 98 contacts : 6 ? 1 (#20) 3 contacts : 3 ? 1.6 (#16) 8 contacts : 8 ? 1 (#20) 10 contacts : 10 ? 1 (#20) 14 contacts : 14 ? 1 (#20) 2 contacts : 2 ? 1.6 (#16) 12 contacts : 8 ? 1 (#20) 4 ? 1.6 (#16) 15 contacts : 14 ? 1 (#20) 1 ? 1.6 (#16) 18 contacts : 18 ? 1 (#20) 19 contacts : 19 ? 1 (#20) 5 contacts : 5 ? 1.6 (#16) size 18* 11 contacts : 11 ? 1.6 (#16) 32 contacts : 32 ? 1 (#20) 30 contacts : 29 ? 1 (#20) 1 ? 1.6 (#16) size 12 size 14 * please consult factory
uts hi seal note : all dimensions are in mm connector family u ts u ts 7 6 - jc 8 8 e e 2 2 p s - - body variation 6 cable plug + backshell 7 jam nut receptacle 0 square flange receptacle backshell : jc = backshell (only for plug) / no digit = no backsell (only for plug) shell size : 8, 10, 12, 14, 18 contact type e = handsolder contacts / r = crimp contacts* / d = pc tail contacts* insert arrangement - see previous page contact gender : p = pin contacts / s = socket contacts insert rotation : no digit = normal / w, x, y, z = different orientations - see below ordering information * please consult factory insert orientation - insert rotated in body (viewed from front face of male insert normal w x y z * 8-98 layout, w and x non standard ortientations / 10-7 & 12-14 layouts, x non standard orientation shell size 8 10 12 14 18 layouts 2 3 3a(98)* 4 33 6 7* 98 3 8 10 2 14* 5 12 15 18 19 11 32 30 angle in degrees w 58 60 60 45 90 90 90 90 - 90 60 - 45 40 43 17 15 30 62 5 180 x 122 210 210 - - - - 180 - 112 155 - 92 90 110 90 165 119 138 193 y - - - - - - - 240 180 203 270 - 184 - 155 180 315 241 222 285 z - - - - - - - 270 - 292 295 - 273 - 234 270 - 340 265 350 range presentation square fange receptacle with handsolder contacts shell size part numbers a b c ? d e f g ? i ? j male contact female contact 8 uts08e - - p - uts08e - - s - 21.5 2.3 11.7 12.0 15.1 21.0 3.2 15.5 12.5 10 uts010e - - p - uts010e - - s - 21.5 2.3 11.7 15.0 18.3 23.8 3.2 17.3 15.1 12 uts012e - - p - uts012e - - s - 21.5 2.3 11.7 19.0 20.6 26.2 3.2 21.8 18.2 14 uts014e - - p - uts014e - - s - 21.5 2.3 11.7 22.2 23.0 28.6 3.2 25.0 21.5 18 uts018e - - p -* uts018e - - s -* 21.5 2.5 11.7 28.5 27.0 33.3 3.2 31.8 27.8 ?d 0.15 c max. shell e 0.25 e 0.25 j i ?g 0.1 b a max. f 0.25 e 0.25 e 0.25 f 0.25 4 holes ?g 0.1 panel cut out thread
uts hi seal note : all dimensions are in mm / * please consult factory jam nut receptacle with handsolder contacts shell size part numbers ? a b c d e f ? g tightening torque male contact female contact 8 uts78e - - p - uts78e - - s - 12.0 19.3 3.2 24.0 19.3 13.75 14.6 2 nm 10 uts710e - - p - uts710e - - s - 14.9 19.3 3.2 27.0 22.2 16.5 17.7 3 nm 12 uts712e - - p - uts712e - - s - 19.0 19.3 3.2 31.8 27.0 21.2 22.5 4 nm 14 uts714e - - p - uts714e - - s - 22.2 19.3 3.2 34.9 30.2 24.3 25.7 5 nm 18 uts718e - - p -* uts718e - - s -* 28.5 19.3 3.2 41.3 36.6 30.6 32.0 5 nm insert nut (see tightening torque) shell c max. panel thickness b max. thread oring a 0.15 e 0.3 d 0.25 g 0.20 f 0.20 panel cut out cable plug with handsolder contacts shell size part numbers ? a b ? cable range standard seal ? cable range reducing seal hexagon d c male contact female contact 8 uts6 - - 8e - - p - uts6 - - 8e - - s - 22.5 54.0 2.5 / 6.5 1.5 / 5.0 16.0 21.3 10 uts6 - - 10e - - p - uts6 - - 10e - - s - 26.7 63.2 2.5 / 8.0 1.5 / 5.0 18.5 23.6 12 uts6 - - 2e - - p - uts6 - - 12e - - s - 30.2 66.7 5.0 / 12.0 3.0 / 9.0 24.0 23.6 14 uts6 - - 14e - - p - uts6 - - 14e - - s - 35.1 71.5 7.0 / 14.0 5.0 / 12.0 26.0 23.6 18 uts6 - - 18e - - p -* uts6 - - 18e - - s -* 42.0 81.3 9.0/ 18.0 7.0 / 16.0 33.0 - ? a max. coupling nut backshell body ? cable range hexagon d backshell plug insert b min. backshell nut coloured ring supplied as optional extra / * please consult factory indutshsfl03en ? copyright souriau - all information in this publication presents only general particulars and shall not form part of any contract. all rights reserved to souriau for changes without prior notifcation or public announcement. for further information, visit our website www.souriau-industrial.com or contact us at contactindustry@souriau.com ? a max. c max. cable plug without backshell accessories: please refer to the uts catalogue
|
